Woohoo you now have the most popular MQTT Broker installed. Sudo apt-get install -f libmosquitto-dev mosquitto mosquitto-clients libmosquitto1 Log in again and install Mosquitto by executing this: # get Mosquitto repo key The above commands will be executed one-by-one and finally you Raspberry will reboot. Update and upgrade your Raspberry OS by executing the following: sudo apt-get update & sudo apt-get upgrade -y & sudo apt-get dist-upgrade -y & sudo reboot To find the Raspberry IP check your router interface for the connected clients. Default user is pi and default password is raspberry. Let’s install it.Ĭonnect to the Raspberry Pi using SSH: ssh above is valid for Linux/macOS. It is needed for the Monitor script to communicate with the rest of the world and to announce who’s home and who’s not. Mosquitto is one of the most popular MQTT brokers available. We are not going to make the Raspberry waiting too much, because we will install Mosquitto. Okay, we have our Raspberry Pi Zero W up and running and ready to work. SanDisk 16GB Ultra microSDHC UHS-I Memory Card with Adapter (Amazon Affiliate link) –.Kingston 16GB microSDHC Canvas Select Plus 100MB/s (Amazon Affiliate link) –.I will recommend to get a reliable SD card from known brand if you wish to minimise the occasional SD card corruption problems.īellow are few examples that I was used before or I’m still using. You will also need a SD card and standard mini USB cable with adapter. Raspberry Pi Zero W Official Starter Kit (Amazon Affiliate link) –.Raspberry Pi Zero W (Amazon Affiliate link) –.Last, but not least you can find it really cheap these days.It have embedded WiFi and Bluetooth, so you can place it almost anywhere you wish,.It has very low power consumption (around 150mA),.The one that I’m using for this project is the Raspberry Pi Zero which is just perfect for Bluetooth presence detection. If you don’t have a Raspberry Pi go grab one, almost any of the models will do.

Esphome raspberry pi zero